Strive for a simple designFebruary 4, 2009
There are a lot of ways to solve a problem, but it seems like many of them are more complicated than they need to be. You start by satisfying one design criteria. Then you tackle the rest of them, one-by-one, until the problem is completed. Unfortunately, you may end up with a Frankenstein product that’s difficult to use and ugly.
The best design, the one to strive for, is the simplest one. This is the one where everything fits together and works. It’s easy to use and elegant. It makes you hit your head and say, “Why didn’t I think of that?!” As an engineer, I’m impressed by simplicity just because it is so hard to achieve. I’m always considering it as the ideal solution, something to aspire to.
“Good design is as little design as possible.
Less but better – because it concentrates on the essential aspects, and the products are not burdened with inessentials. Back to purity, back to simplicity!”
– Dieter Rams
“Everything should be as simple as possible, but not simpler!”
– Albert Einstein
I am usually found within the electro-mechanical device sphere, but I can appreciate good design principles wherever they happen to show up. I keep thinking about something I saw while fishing for Rockfish on the Chesapeake Bay last Spring. I can’t find anything online about it, so I thought I’d share. I’m not a fisherman, so you’ll have to excuse any incorrect terminology. I had seen fishing outriggers that were long rigid poles that stick out from the boat sides and the fishing line attached along the length, like these. They keep the lines wider apart so you can have more lines in the water without tangling.
On this boat, though, they had outriggers that were a couple of wood planks mounted together with threaded rod. A line is attached to the eye-bolt at the front and it’s dropped off the boat. As the boat drags it, the water rushes past the planks and forces the outrigger away from the boat until the angle, rushing water, and mainline reach an equilibrium. Attach your fishing lines to the mainline using shower-curtain hoops. When a fish bites and drags the line, it breaks free of the hoop. It’s as simple as can be, and you can build a pair for around $50, I’d guess. After-market outriggers go for $500 and up, plus there’s professional installation and maintenance.
I’m not all that impressed by “cheap and dirty” solutions, even when I use them myself. For the most part, they’re just enough to get by when you can’t come up with the right solution. However, even though these are inexpensive outriggers, they’re also easy to install, can reach out 50′ to 100′ off the boat without any modifications, and don’t raise your height into the local bridges. They might be better than the “real thing”!
Unfortunately, I didn’t think to get a picture of the setup, so I created a CAD model from memory. It may need a bit of tweaking to work properly. I’m guessing the 2″ x 12″ boards are 36″ long, and it’s about as wide assembled. Remember to use stainless hardware and boards that float.
I’m interested to hear if anyone knows the origin of these things or how well they really stack-up against mounted outriggers. All of the other boats in the marina seemed to have them, but maybe it’s just a local thing.